SIP 10IN TABLE SAW & STAND

SIP Lightweight 250mm Table Saw & Stand Kit

This table saw from SIP Industrial is supplied with a sturdy leg kit to allow it to act as another work surface in your workshop, but it can also be used on the floor or on a worktop if used portably. It weighs just 20.5kg, meaning it is convenient enough to transport it to and from the job site in a van.

While the saw is lightweight, the motor is not. It features a powerful 1.8 Kilowatt motor, that's 2.4 horsepower, spinning the blade up to 5,000 rpm for smooth and efficient cuts. The saw takes a 250mm diameter saw blade with bore diameter of 30mm. This blade allows a maximum cut depth of 85mm for cuts at 90°, and 65mm for cuts at 45° bevel angle.

For user safety there is a No-Volt Release switch, meaning the saw will not automatically start up again if power is restored after a power loss (tripped breaker, power cut, etc). To keep dust to a minimum you can attach a dust extractor to the 35mm dust port on the saw for collection right at the source. 

Features:

• Includes legs for convenience.
• Can be used on the floor or tabletop instead.
• Uses a ten inch diameter saw blade.
• Cuts 85mm thickness at 90°.
• Blade can bevel up to 45 degrees.
• Suitable for home or professional use.
• Runs off standard mains electric.
• 940mm x 640mm table top.